Phenom 34 Overview

Looking around the bow, a spacious entertainment zone designed with optional bow seating. Each seat includes additional storage under the lids and toe kicks all the way around.

For comfort, a high back backrest and a recessed hard-bottomed cushion. The cushions are installed on plungers for alignment and ease of removal.

The center can also be equipped with the electronically actuated bow table. When not in use, it lowers flush with the deck and completely out of the way.

Other amenities here at the bow includes a flush thru-hull Windlass Anchor System w/ a Stainless steel Anchor & 600' of rode, a freshwater washdown in the anchor hatch, powder coated Recessed Bow Handrails and designed-in storage all the way around.

A convenient feature designed into the chaise lounge is the forward sliding cushion. The front half of the cushion slides forward for additional legroom. The cushion slide allows easy access to the coffin box cooler without the uncomfortable gap. The trick is when the lid opens, the cushions seamlessly separate, allowing for the lid to fully open.

The forward cushion covers the lid to the 275-quart insulated built-in cooler.

Moving aft of the chaise lounge, you will find the Seamless Console Entry Door leading to the interior. The door is also lockable for security when you’re not on the boat.

The interior of the Phenom 34 features headroom over 6 and a half feet.

As part of the standard package, we include a tool kit with all stainless-steel tools in a molded-in case and a premium coast guard approved medical first aid kit.

In the forward section you’ll find a large storage area for any necessary essentials or valuables you may bring on board.

In here you’ll find a Porcelain Head w/ Overboard Discharge & Pump Out, along with a freshwater sink with an extendable shower hose and drains in the floor.

For an extra added touch, we’ve illuminated the console interior for a cool glow at night.

Walking around to the leaning post reveals the standard Triple Premium Captain’s Chairs. The chairs feature ergonomics and shaping inspired by luxury sports cars.

Each one is installed on an electric slide that allows each passenger to find the perfect distance from the helm. These features provide outstanding comfort for the captain and two passengers on those long runs or when simply cruising around.

There is one more trick built into these seats. With the simple tap of a button the seats become heated for that additional comfort on those cold morning fishing trips.

The fiberglass leaning post that they sit on is masterpiece of engineering and is fabricated using a complex 5-piece mold to obtain the perfect contouring dictated by the design. It features toe kicks all the way around and houses the battery bank.

The Phenom 34 is powered by 7 Discover Traction Dry cell AGM Group 31 batteries. These batteries are the next generation of AGM batteries with an extended service life that delivers exceptional performance in extreme temperatures, extreme vibration and exceeds all industry standards.

To top these off we’ve also designed in one of the safest shore power systems on the market. The Smart Plug ELCI 30 Amp shore power system features a safe, simple and secure way and virtually eliminates the risks associated with shore power failures due to overheating. It allows you to fully test the system before engaging with a simple one-button test. Once green, you simply flick on the switch to turn on the shore power.

The standard 100-amp battery charger delivers the exceptional amount of power required to run a modern performance center console yacht.

Wrapping around the back side of the leaning post, we’ve included a large tackle center. You’ll find storage for tackle boxes, drawers for additional gear and a convenient knife and pliers storage on the front.

For additional storage, both sides of the leaning post have a seamless door to access storage drawers that can be used for tackle storage or other items.

Wrapping up the helm area, we have a large helm pad featuring the Phenom logo and a console footrest storage.

The aft area of the Phenom 34 is another large multipurpose entertainment zone. At the center of it all, is a 3-person bench seat that completely disappears when not in use. We’ve taken this design challenge and delivered a rear bench that is worthy of a boat of this caliber.

Pulling on the handles reveals the large seat and custom hardware raises up the backrest in one fluid movement. The backrest is positioned at the perfect height to provide you with a comfortable seat even on long trips to your next adventure.

To make this bench even better you can option to have this bench seat motorized. The simple press of a button actuates the large seat with ease.

The seat itself hides an important functional safety feature of this boat. Under the seat is a large polished stainless-steel drain for the self-bailing cockpit system which features two drains overboard with seacocks.

The deck has a gutter system throughout that routes any water on deck safely out to the gutters and into the collector box at the rear. Overall, this design is very effective at keeping the deck dry.

We wrap up this area with a spacious swim platform around the outboards. This is the perfect area to hang out in while at a sandbar and features decking that can be personalized to your preference. Modern outboard engine rigging allows for a clean and obstruction-free installation.

One of the most impressive innovations for Phenom is our proprietary automatic pressurized aquarium livewell system. The Phenom 34 has dual 30 gallon or 113 liters aquarium livewells, each with two pumps. All 4 pumps sit inside of a custom sea chest in the bilge and are fed by two High Speed Raw Water Pick Ups. They feature a large seamless front glass and a hybrid fiberglass lid with the Phenom logo. The large seamless front glass brings an elegant style to the cockpit area of the boat. The livewells are topped off with a hybrid fiberglass lid with the Phenom Logo. There are two modes in our livewell system, auto and manual. In the manual mode, the livewells operate how you would expect a normal pressurized livewell system to work. If not pressurized correctly, water pours out of the back and is constantly showering your engines and swim platform with raw water.

Our goal was to design a better livewell system, one that resolves the common issues you may have encountered with standard pressurized livewells. The system is powered by the on-board EmpirBus digital system and our custom algorithms for what we call, Automatic mode. For starters, we’ve equipped each tank with a pressure sensor that feeds the pressurization status of the tank back to the EmpirBus. The system then calculates the power required to keep the tank right at 0.1 PSI at a rate of 10 times a second. Making the necessary adjustments to maintain the perfect equilibrium of pressure and over pressure. Too much pressure is what causes the water to overflow and too little pressure cause the bait to get slushed around which is the leading cause of descaling, red nose and dead baits.

Another unique feature of these tanks is the location of the fills. The tank is designed to circulate the water constantly to eliminate ammonia and waste as quickly as possible. There are two fills located vertically that causes the water to create a swirling motion towards the drain. This ensures evenly clean water in the bait tank from top to bottom.

If you recall, there are 4 pumps in this system. Each livewell has a main pump and a backup pump. If the EmpirBus system detects a fault in the main pump, it will display an error message on the screen alerting you of the failure. The operator can then open the total access compartment to gain access to the valves. You must first close the valve on the main pump and open the valve on the backup pump. Agree to the prompt on the screen and resume normal operation of the livewell on the backup pump. This redundancy is critical offshore or in a tournament scenario to ensure you don’t lose your bait to a pump failure.

Lastly, we know that not every trip requires pressurized livewells so we also designed a short standpipe for partial fills, ideal for keeping shrimp, crabs or lobsters. As well as the built-in plug to utilize the tanks as a cooler.

There are 2 248-Quart Macerated In-Deck Fish Boxes at the rear of the boat. Notice the detail on the underside of the lid for extra insulation. The inner part of the box is built into the stringer of the boat and has over 4 inches of insulation all the way around.

Mid-ship, there are 2 142-Quart In-Deck Storage Boxes. The extra-large lids make it a breeze to load items in.

On the port side box, you will find the fitting for the overboard toilet pump-out on the designed landing inside of the box.

Located under the deck ring, we have the raw water hook up with spigot on the port side and the same thing for freshwater on the starboard side. This boat can hold up to 30 gallons of freshwater or 114 liters.

The rear Hubbell receptacles can be found under the deck ring behind the side entry doors and on the front side of the mid-ship plenums.

Along the top of the deck ring, we have 6 Gemlux screwless rod holders. 3 on each side.

Starting with the top itself, it’s an over-sized fiberglass top. To ensure extreme rigidity it has 6 attachment points. This design creates a beautiful look on the water and prevents any flex in rough conditions.

For protection, an integrated tempered glass windshield with an actuated vent for ventilation will give everyone behind the helm protection from the elements.

At the center, we have a designed in spot for integrated reel colors teaser reels. As a standard we provide them in an anodized finish. The line runs through the hard-top structure and out to designated spots in the top.

Also at the top, you will find two ICOM M510 VHF radios. The mics are located on opposite sides of the steering wheel. Having two radios will allow you to monitor two channels at the same time, a great feature for tournament fishing.

At the center, is the main engine gauge. The Mercury VesselView 5 displays all of the critical engine data including rpm, speed, fuel flow and efficiency, temperature, trim and more.

Across the rear of the top, we have a 7 integrated rocket launchers.

This top has been designed to accept the optional Gemlux Bluewater Outriggers. These outriggers and carbon fiber poles are designed to the highest standard in the fishing industry. They feature a set of collapsible 22-foot poles with triple rigging and a reinforced base ready to pull dredges.

Along the edge of the hard-top, we have a designed-in a grab edge. If you are walking down the gunwale, this safety feature will come in handy. Doesn’t matter where you are, there’s always a spot for you to safely grab.

At the helm, a pair of Garmin 8617 17-inch screens. From this command center you will be able to monitor all of the systems on board and even reset any of the breakers through the built-in breaker manager in the EmpirBus.

We’ve created an all-encompassing Phenom app that includes a custom designed “Home” screen to give you a full boat status at a glance. This screen will also give you access to the most commonly used functions. There are other screens for fluid levels, battery monitoring, lights and pumps and the automatic livewell system.

For monitoring what’s ahead, an integrated Garmin Fantom 124 radar that puts out 120 watts of power and has built in MotionScope for tracking targets.

The keel of the boat has a pocket Airmar PM275LHW wide-beam CHIRP Transducer with 1kw of power. For access, we’ve designed in a removable section inside of the console.

The Mercury Joystick Piloting System allows you to maneuver the boat diagonally, move sideways or even spin the boat.

Standard on the Phenom 34 is a Seakeeper 3 that was designed into a cradle pod in the stringer. The Seakeeper gyro eliminates up to 95% of roll on the boat and is a must have for offshore fishing. The large access compartment allows for the best access for maintenance and repairs. The Seakeeper system will completely change the way you offshore fish and provide a reassuring comfort to new combers.

No modern performance center console would be complete without an onboard telematics system and for that we’ve equipped the Garmin OnDeck™ Boat Monitoring System. This system will allow you to monitor your Phenom 34 from anywhere in the world from your phone.

Topping off the list of options is a FLIR M332 thermal camera that will allow you to navigate in complete darkness safely. This model includes a gyro to stabilize the picture for a crisp on screen image.

As part of your personalizations, we have a separate version of the console floor that allows for the safe storage of up to 8 rods. You can put your rods away for travel or overnight while at the dock.

The aft area features a tumblehome design with bustles at the transom. Along the sides, a sleek stainless steel hull guard rub rail adds to the elegance.

Every Phenom 34 features a premium gelcoat hull side color in several standard colors with personalizations available upon request.

The stylish hull sides reveal the 2-piece side entry doors on both port and starboard sides with a removable ladder.

Curated multi-texture materials by Sileather® can be found throughout the cockpit and down below deck with a plush and soft feel. Great care was taken to every single seat on the boat to ensure the most comfortable and ergonomically correct seating position.

Driving the sound system is a Garmin Fusion Apollo RA770 head unit with a full-function remote at the bow. The head unit is located directly above the helm on the hardtop.

Throughout the cockpit, there are 19 - JL Audio M6 speakers, 10 M6 770s, 6 M6 660s, 2 M6 8-inch subs, and a single M6 12-inch subwoofer. Additionally, we’ve gone a step further in integrating them into the deck. The innovative integrated speaker grille covers looks amazing throughout the cockpit and keeps every surface clean, uniform and free of clutter.

Powering these speakers are two of JL Audio’s state of the art MVi amplifiers with built-in DSP. This system has been hand-tuned by the team at JL to deliver the truest sounding system on the water. Every speaker is equalized to deliver the perfect sound in its environment and the result is impressive.

Powering these speakers are two of JL Audio’s state of the art MVi amplifiers with built-in DSP. This system has been hand-tuned by the team at JL to deliver the truest sounding system on the water. Every speaker is equalized to deliver the perfect sound in its environment and the result is impressive. When it was time to light up the cockpit and underwater, we looked no further than Lumitec, the industry’s leading lighting experts. All of the RGB lights are controlled by the Lumitec Poco Digital RGB Lighting Controller that power a slew of mirage flush lights on the hard top, 6 RGBW SeaBlaze underwater lights which span from the transom to the steps, side spreader lights, livewells, sea chest pump box and every inch of the deck ring with moray flex lighting with zero hot spots. This interior LED Lighting package brings this cockpit to the next level in style and function.

Safety lights includes an electronically deployed anchor light by Taco marine and integrated Lumitec navigation lights that double up as docking lights.

The top is also equipped with an array of razor spreader lights at the front. The center light is a spotlight and the outer two are flood lights. At the back, an additional flood light for the rear cockpit.

Wrapping all the way around the bow and cockpit areas are bolster cushions. These stylish cushions feature a double diamond stitch pattern and fit tightly around every corner.

Inside of the console, you will find wood accent vanity with a sink and pull-out shower.

Standard for the Phenom 34 is the interior cabinet package. This large cabinet offers a deep storage area utilizing the available space beneath the coffinbox. This is a great place to keep additional safety gear, tackle and assorted items.

For the ultimate custom yacht look, we offer faux teak packages for the transom, seat backs, helm pod and bow toe rail.

Keeping the elegant and classy style we’ve built in custom Phenom Hawse pipes that lead to the Gemlux 10” pull up cleats located midship and aft.

While fishing or at the sandbar, the top has been recessed to accept the rear Gemlux shade system. This shade does not interfere with outriggers or fishing lines as it has no attachment points on the deck.