Phenom 43 Overview

Looking around the bow, a spacious entertainment zone designed with optional bow seating. Each seat includes additional storage under the lids and toe kicks all the way around.

For comfort, a high back backrest and a recessed hard-bottomed cushion. The cushions are installed on plungers for alignment and ease of removal.

The center can also be equipped with the electronically actuated bow table. When not in use, it lowers flush with the deck and completely out of the way.

Other amenities here at the bow includes a flush thru-hull Windlass Anchor System w/ a Stainless steel Anchor & 600' Line, a freshwater washdown in the anchor hatch, powder coated Recessed Bow Handrails and designed-in storage all the way around.

Wrapping around the bow of the Phenom 43, you will find some additional storage for small items. This area is covered with a Corian counter.

The front of the console features a contoured Chaise Lounge with armrests. The front half of the cushion slides forward for additional legroom. The cushion slide allows us to have the two console-front cushions touching without the uncomfortable gap in between. The trick is that when the lid swings up, the cushions seamlessly separate, allowing the lid to fully open.

The lockable console interior on the Phenom 43 offers a secure and private space to store personal belongings or valuable gear. Designed with a flush-fitting door and integrated locking mechanism, it blends seamlessly into the console exterior for a clean look while giving owners peace of mind when leaving the boat unattended. This feature adds both functionality and security without compromising the yacht’s refined aesthetic.

The Garmin GPSMAP 943xsv multifunction display, installed inside the console of the Phenom 43, provides full access to the boat’s systems from a protected, climate-controlled space. This 9-inch touchscreen offers the same capabilities as the helm displays, allowing you to monitor and control navigation, sonar, radar, lighting, and engine data. Its integration with NMEA 2000 and OneHelm systems ensures seamless operation of onboard electronics, while the high-resolution IPS display delivers clear visuals in any lighting condition. Whether you’re planning routes, checking system statuses, or adjusting settings, the 943xsv keeps you connected and in command without leaving the cabin.

The Phenom 43 is equipped with a 120-volt, 10,000 BTU Dometic TX 10 air conditioning system, integrated with an NMEA controller for seamless operation. This setup ensures efficient climate control within the console interior, enhancing comfort during extended outings. The system’s integration with the vessel’s digital network allows for precise temperature adjustments and monitoring, contributing to a more enjoyable onboard experience.

The Phenom 43 features a 32-inch 4K television seamlessly integrated into the console interior, providing a high-definition viewing experience in a comfortable, climate-controlled environment. Positioned for optimal visibility from both the convertible queen-sized berth and U-shaped seating area, this entertainment setup enhances onboard relaxation. Whether you’re unwinding after a day on the water or enjoying a movie night at anchor, the 4K display adds a touch of home-like comfort to your time aboard.

The Phenom 43’s convertible full queen-sized bed and U-shaped bench seating offer a versatile solution for both relaxation and socializing. During the day, the U-shaped bench provides ample seating around an actuated teak table with a foldable leaf, creating an inviting space for dining or conversation. When it’s time to rest, the bench easily transforms into a full queen-sized berth, ensuring a comfortable sleeping area for overnight stays. This dual-function design maximizes the utility of the console interior, catering to various needs without compromising on comfort or style.

The under-berth storage on the Phenom 43 offers a convenient space to stow personal items or gear, keeping the cabin tidy and essentials close at hand without sacrificing comfort or style.

The Phenom 43 features an actuated teak table with a foldable leaf that serves dual purposes: it provides a versatile dining or socializing space and seamlessly converts into a filler board to complete the full queen-sized berth. This design maximizes the functionality of the console interior, allowing for easy transitions between lounging and sleeping configurations.

The Phenom 43 features a separate enclosed head, a standout amenity for a center console in this class. It provides complete privacy without compromising interior space, making the cabin feel open and comfortable while offering the convenience of a fully private bathroom.

Inside the separate head area, the Phenom 43 includes a fully enclosed shower with a glass door, keeping the rest of the space dry and functional. It’s a refined touch that adds true yacht-level comfort to an already well-appointed interior.

This freshwater Porcelain Head includes Overboard Discharge & Pump Out.

Before we wrap up the fishing amenities, there is one more useful option that we’ve designed in and it is inside of the console. As part of your personalizations, we have a separate version of the console floor that allows for the safe storage of up to 10 rods. You can put your rods away for travel or overnight while at the dock.

The Phenom 43’s full galley offers a feature-rich cooking space with elegant cabinetry, solid-surface countertops and ample storage. It’s thoughtfully designed with everything you need for preparing meals on board, all wrapped in a high-end finish that feels right at home on a luxury yacht.

The galley on the Phenom 43 features a Corian countertop and backsplash paired with a stainless steel sink, combining durability with upscale style. The seamless surfaces are easy to clean and built to withstand the marine environment while elevating the overall look of the interior.

The Phenom 43 features a built-in refrigerator at the galley, offering convenient cold storage for drinks, snacks or provisions. Quiet, efficient and seamlessly integrated, it supports longer trips and adds comfort to life on board.

The Phenom 43 includes built-in storage cabinets throughout the console interior, offering organized space for stowing gear, supplies or personal items. These cabinets blend seamlessly into the design while maximizing functionality without cluttering the living area.

The Phenom 43 features console flooring with a rich wood pattern that adds a warm, refined look to the interior. It brings the feel of a luxury yacht cabin while offering the durability and easy maintenance needed for life on the water.

As part of the standard package, we include a tool kit with all stainless-steel tools in a molded-in case and a premium coast guard approved medical first aid kit.

The Phenom 43 is equipped with 110V wall outlets throughout the console interior, providing convenient access to household power for charging devices, powering appliances or using personal electronics while on board.

Lifting the entry steps, you will find some additional storage.

The Phenom 43 provides easy access to the sump pump through a dedicated panel inside the console, making routine checks or maintenance quick and hassle-free. It’s a smart design detail that speaks to long-term ownership and serviceability.

The air conditioning comfort doesn’t stop inside of the console. The standard Triple Premium Captain’s Chairs feature a custom Phenom designed chair that flows cold air through specially designed slits on the backrests. The chairs feature ergonomics and shaping inspired by luxury sports cars. But there is one more trick to these chairs, they are also heated. Perfect for those early cold winter morning fishing trips.

Each one is installed on an electric slide that allows each passenger to find the perfect distance from the helm.

The fiberglass leaning post that they sit on is masterpiece of engineering and is fabricated using a complex 5-piece mold to obtain the perfect contouring dictated by the design. It features toe kicks all the way around and houses the battery bank.

The Phenom 43 is powered by 8 Discover Traction Dry cell AGM Group 31 batteries. These batteries are the next generation of AGM batteries with an extended service life that delivers exceptional performance in extreme temperatures, extreme vibration and exceeds all industry standards.

Wrapping around the back side, a very comfortable 3-4 person mezzanine seat with molded in armrests.

The bottom cushion hides a conveniently located refrigerated cooler box for the rear area of the boat. The system freezes the box doing away with need for ice. This system can also feed ice from the on-board ice maker to this box.

To gain access to the Fathom system, we have designed a total access hatch. This allows any maintenance to be performed with ease.

At the bottom of the console, you will find 2 storage for small items.

Wrapping up the helm area, we have a large helm pad featuring the Phenom logo and a console footrest storage.

The backrest includes a storage location for the standard Buzbe boxes.

For additional storage, both sides of the leaning post have a seamless door to access storage drawers that can be used for tackle storage or other items.

The aft area of the Phenom 43 is another multipurpose entertainment zone. At the center of it all, is a 3-4 person bench seat that completely disappears when not in use. We’ve taken this design challenge and delivered a rear bench that is worthy of a boat of this caliber.

At the flip of a switch, a large seat and the custom hardware raises up the backrest all in one fluid movement. The backrest is positioned at the perfect height to provide you with a comfortable seat even on long trips to your next adventure.

The deck has a gutter system throughout that routes any water on deck safely out to the gutters and into the collector box at the rear. Overall, this design is very effective at keeping the deck dry.

We wrap up this area with a spacious swim platform around the outboards. This is the perfect area to hang out in while at a sandbar and features decking that can be personalized to your preference. Modern outboard engine rigging allows for a clean and obstruction-free installation.

One of the most impressive innovations on this boat is our proprietary automatic pressurized aquarium livewells. Each tank has a capacity of 40 gallon or 151.4 liters and two pumps. All 4 pumps sit inside of a custom sea chest in the bilge and are fed by two High Speed Raw Water Pick Ups. They feature a large seamless front glass and a hybrid fiberglass lid with the Phenom logo. In the manual mode, the livewells operate how you would expect a normal pressurized livewell system to work. Water pours out of the back and is constantly showering your engines and swim platform with raw water. We set out to design a better livewell system and what we’ve come up with resolves all of the common issues you may have encountered.

The system is powered by the on-board EmpirBus digital system and our custom algorithms for what we call, Automatic mode. For starters, we’ve equipped each tank with a pressure sensor that feeds the pressurization status of the tank back to the EmpirBus. The system then calculates the power required to keep the tank right at 0.1 PSI at a rate of 10 times a second. Making the necessary adjustments to maintain that perfect equilibrium of pressure and over pressure. Too much pressure is what causes the water to overflow and too little pressure cause the bait to get slushed around which is the leading cause of descaling, red nose and dead baits.

Another unique feature of these tanks is the location of the fills. The tank is designed to circulate the water constantly to eliminate ammonia and waste as quickly as possible. There are two fills located vertically that causes the water to create a swirling motion towards the drain. This ensures evenly clean water in the bait tank from top to bottom.

If you recall, there are 4 pumps in this system. Each livewell has a main pump and a backup pump. If the EmpirBus system detects a fault in the main pump, it will display an error message on the screen alerting you of the failure. The operator can then open the total access compartment to gain access to the valves. You must first close the valve on the main pump and open the valve on the backup pump. Agree to the prompt on the screen and resume normal operation of the livewell on the backup pump. This redundancy is critical offshore or in a tournament scenario to ensure you don’t lose your bait to a pump failure.

Lastly, we know that not every trip requires pressurized livewells so we also designed a short standpipe for partial fills, ideal for keeping shrimp, crabs or lobsters. As well as the built-in plug to utilize the tanks as a cooler.

There are (2) 347-Quart Macerated In-Deck Fish Boxes at the rear of the boat. Notice the detail on the underside of the lid for extra insulation. The inner part of the box is built into the stringer of the boat and has over 4 inches of insulation all the way around.

Mid-ship, there are (2) 225-Quart In-Deck Storage Boxes. The extra-large lids make it a breeze to load items in.

On the port side box, you will find the fitting for the overboard toilet pump-out on the designed landing inside of the box.

Located under the deck ring, we have the raw water hook up with spigot on the port side and the same thing for freshwater on the starboard side. This boat can hold up to 50 gallons of freshwater or 190 liters.

As far as receptacles go, we’ve equipped this boat with 4 electric reel outlets. The rear Hubbell receptacles can be found under the deck ring behind the side entry doors and on the front side of the mid-ship plenums.

Along the top of the deck ring, we have 6 Gemlux screwless rod holders. 3 on each side.

Starting with the top itself. It is an over-sized fiberglass top with 6 attachment points. This design gives the top an extremely rigid structure in extreme conditions without any flex. This top was also designed with the weight of a tower in mind in case you go that route.

For protection, an integrated tempered glass windshield with an actuated vent for ventilation will give everyone behind the helm protection from the elements.

For the morning and rainy trips, the windshield wipers add safety and convenience to the helm of the Phenom 43.

In the center section, we have a designed in spot for integrated teaser reels. As a standard, we have a pair of electric teaser reels. The line for those runs through the hard-top structure and out through designated spots on the top. When not in use, a lid closes to hide them away and regain a beautiful clean look.

Also at the top, you will find two ICOM M510 VHF radios. The mics are located inside of the glove compartment to the left of the helm to keep them out of the way. Having two radios will allow you to monitor two channels at the same time, a great feature for tournament fishing.

At the center, is the main engine gauge. The Mercury VesselView 7 displays all of the critical engine data including rpm, speed, fuel flow and efficiency, temperature, trim and more.

Across the rear of the top, we have a double row of rocket launchers for a total of 13 rods. This can be personalized to a single row of 7.

This top has been designed to accept the optional Gemlux Bluewater Outriggers. These outriggers and carbon fiber poles are designed to the highest standard in the fishing industry. They feature a set of collapsible 22-foot poles with triple rigging and a reinforced base ready to pull dredges.

Along the edge of the hard-top, we have a designed-in a grab edge. If you are walking down the gunwale, this safety feature will come in handy. Doesn’t matter where you are, there’s always a spot for you to safely grab.

At the helm, a pair of the Garmin 9227 27-inch screens. From this command center you will be able to monitor all of the systems on board and even reset any of the breakers through the built-in breaker manager in the EmpirBus.

We’ve created an all-encompassing Phenom app that includes a custom designed “Home” screen to give you a full boat status at a glance. This screen will also give you access to the most commonly used functions. There are other screens for fluid levels, battery monitoring, lights and pumps and the automatic livewell system.

For monitoring what’s ahead, an integrated Garmin Fantom 124 radar that puts out 120 watts of power and has built in MotionScope for tracking targets.

The keel of the boat has a pocket Airmar PM275LHW wide-beam CHIRP Transducer with 1kw of power. For access, we’ve designed in a removable section inside of the console.

If you are at the dock, this boat is equipped with one of the safest shore power systems on the market. The Smart Plug ELCI 50 Amp shore power system features a safe, simple and secure way and virtually eliminates the risks associated with shore power failures due to overheating. It allows you to fully test the system before engaging with a simple one-button test. Once green, you simply flick on the switch to turn on the shore power.

While the radios are up at the top, the mics are conveniently located at the helm area within the large glove box. Additionally you will find some storage for small items.

The first is the Mercury Joystick Piloting System which will allow you to maneuver the boat diagonally, move sideways or even spin the boat.

The second is the Vetus Bow Pro 764 bow thruster which is designed to work in conjunction with the joystick to give you superior maneuverability. These two systems combined will give you confidence to dock and maneuver in any situation. We’ve also taken care of designing in access to the bow thruster for any maintenance or repairs.

Very few systems on the market fundamentally change the experience of offshore fishing the way a Seakeeper system does. Standard on the Phenom 43 is a Seakeeper 4.5 that was designed into a cradle pod in the stringer. The Seakeeper gyro eliminates up to 95% of roll on the boat and is a must have for offshore fishing. The large access compartment allows for the best access for maintenance and repairs.

Topping off the list of options is a FLIR M332 thermal camera that will allow you to navigate in complete darkness safely. This model includes a gyro to stabilize the picture for the crispest image on the screen.

The aft area features a tumblehome design with bustles at the transom. Along the sides, a sleek stainless steel hull guard rub rail adds to the elegance.

Every Phenom 43 features a premium gelcoat hull side color in several standard colors with personalizations available upon request.

The stylish hull sides reveal the 2-piece side entry doors on both port and starboard with removable ladder.

Curated multi-texture materials by Sileather® can be found throughout the cockpit and down below deck with a plush and soft feel. Great care was taken to every single seat on the boat to ensure the most comfortable and ergonomically correct seating position.

Driving the sound system is a Garmin Fusion Apollo RA770 head unit with a full-function remote at the bow. The head unit is concealed inside of the console glove box and has full integration into the Garmin displays.

Throughout the cockpit, there are JL Audio M6 speakers but we’ve gone a step further in integrating them into the deck. The innovative integrated speaker grille covers looks amazing throughout the cockpit and keeps every surface clean, uniform and free of clutter.

Powering these speakers is JL Audio’s state of the art MVi amplifiers with built-in DSP. This system has been hand-tuned by the team at JL to deliver the truest sounding system on the water. Every speaker is equalized to deliver the perfect sound in its environment and the result is impressive.

All of the RGB lights are controlled by the Lumitec Poco Digital RGB Lighting Controller that power a slew of mirage flush lights on the hard top, 6 RGBW SeaBlaze underwater lights which span from the transom to the steps, side spreader lights, livewells, sea chest pump box and every inch of the deck ring with moray flex lighting with zero hot spots. This interior LED Lighting package brings this cockpit to the next level in style and function.

Safety lights includes an electric anchor light by Taco marine and integrated Lumitec navigation lights that double up as docking lights.

The top is also equipped with an array of razor spreader lights at the front. The center light is a spotlight and the outer two are flood lights. At the back, an additional flood light for the rear cockpit.

The rear back spreader, lights up the cockpit for night fishing and loading early in the morning.

When coming into the dock, the side spreaders will light the way shining both out and down.

Wrapping all the way around the bow and cockpit areas are bolster cushions. These stylish cushions feature a double diamond stitch pattern and fit tightly around every corner.

For the ultimate custom yacht look, we offer faux teak packages for the transom, seat backs, helm pod and bow toe rail.

Pulling up to the dock, you will find conveniently located Phender Pro Quick Disconnect holders and a custom Phenom Hawse pipe that leads to the Gemlux 10” pull up cleats located midship and aft.

While fishing or at the sandbar, the top has been recessed to accept the rear Gemlux shade system. This shade does not interfere with outriggers or fishing lines as it has no attachment points on the deck.